LCP@lemmy.world to 3DPrinting@lemmy.worldEnglish · 9 months ago3D Printing Filament from Hot Glue Sticksyoutu.beexternal-linkmessage-square9fedilinkarrow-up184arrow-down13
arrow-up181arrow-down1external-link3D Printing Filament from Hot Glue Sticksyoutu.beLCP@lemmy.world to 3DPrinting@lemmy.worldEnglish · 9 months agomessage-square9fedilink
minus-squareEmilieEvans@lemmy.mllinkfedilinkEnglisharrow-up1·edit-29 months agoIt’s easier than printing two materials: e.g. colorFabb varioShore TPU low print temperature: “solid” material high print temperature -> foaming agent reacts -> light weight & soft material There are also other technologies out there including toolchangers with 2k (2 component mixing) print heads.
It’s easier than printing two materials: e.g. colorFabb varioShore TPU
low print temperature: “solid” material
high print temperature -> foaming agent reacts -> light weight & soft material
There are also other technologies out there including toolchangers with 2k (2 component mixing) print heads.