clif

Same. I go through periods of printing a lot then getting busy and not touching it for months. I’ve noticed my PLA and PLA+ get really brittle as they age even when stored in a dry box and drying again before use.

I can usually get it to print but I have to be gentle with it.

Other recommendations are great but you could also try some type of adhesive AFTER you’ve eliminated any other potential problem sources.

It does look a over extruded. Have you calibrated your esteps? I always need to do that when changing filament types and sometimes even between rolls of the same filament type (especially bargain bin PLA from amzn)

My ender 3 with a textured glass bed sticks perfect with PLA and nothing else. For some reason PLA+ tends to lift. Glue stick helped with PLA+ but I hated dealing with because it REALLY stuck so I switched to masking tape. That does the job and is easier to remove. On my CR-10 with plain glass bed (no texture) I use hairspray… Mostly because that’s what the guy I bought it from recommended and, to be honest, it does work amazingly. Nothing sticks to that glass plate bed without an adhesive but it pops right off once the bed cools down.

That said, I don’t recommend “extra” adhesives unless you’re fully sure you’ve solved any other potential problems. They can be a help/bandaid but if the root cause is something else then you’re just masking it.

Some materials and beds need some help, some don’t. I primarily use PLA and PLA+ with the occasional PETG and TPU.

I had to check and make sure I didn’t type the comment above because it sounds exactly like me.

All UIs do things slightly differently, the CLI is always exactly the same… Everywhere. UI for non trivial conflict resolution? Definitely. For everything else, CLI.

And, I’m also reticent to use rebase unless I have to. Gimme that good ole FF :)

I once had a task stripping a ODM out of a large project, reverting to the native driver, because of its (extremely) poor performance. Also the fun of profiling the project to prove the ODM was to blame. I also empathize with the “supposed to make things simpler, makes them more complicated instead” point you make.

From many experiences, I hate ORM/ODMs and am immediately suspicious of anyone who likes them.

This is a great answer. Bumping it as someone who got forced to move into Node/JS around 8 years ago and came to love it (after the ES2015 changes :). It’s primarily what I work in and I teach community classes on it these days.

I’ve been dabbling in Go lately for lower level server side stuff and, while I don’t dislike it, it’s a big shift in thinking. There are a lot of niceties to the Go ecosystem.