The +50% cost in shipping to the USA really hurts. If he could work with someone in the USA as a distributor he could really up the number of sales.
The +50% cost in shipping to the USA really hurts. If he could work with someone in the USA as a distributor he could really up the number of sales.
That guy is no trek fan, he’s doing the Vulcan salute wrong. It looks more like the shocker. Two in the pink two in the stink.
Best tool I found to help with the setup of mmwave sensors is using these cards.
But for some reason I can’t find where I got the template, I will share mine.
` type: vertical-stack title: Lab Motion cards:
Edit: code blocks are hard in Lemmy.
That’s nifty but I would have gone with recessed buttons those look painful to tap with the sharp corners.
I prefer Resin scent
I made several scenes with each color different for each light I wanted cycled and then made a script call the scenes with restart. Or I have some scenes triggered in node red on a loop.
Yes notifications need an overhaul, we assign devices to people we should be able to choose notify.user as a service and choose the user to send the notification to. That way when we change devices we only have to associate the device with the user again.
Yes create a input boolean for a guest mode and then on your automations you set condition > entity > guest mode > on/off
Oh also you can use trigger IDs for your triggers and then use the choose action and trigger on trigger id.
If it is a power tracking one you should be able to see if it’s being overloaded. Unplug the washer and see if it still turns off if it does then something is turning it off. I really trust the sonoff ones that I flash with tasmota, they are WiFi but they are rock solid and offline. They make zigbee ones too. The sonoff one on my all in one washer never has had a problem.
Check what IP HA is expecting and then check the IKEA hub to see if they match. If you have DHCP turned on for your hub then when you moved it it might have gotten a new IP. Easy fix its the case, just set a static IP on the IKEA hub for what HA expects and then restart the integration.
Then like any corporation they had the little troublemaker snuffed out.
I use fdm prints for food all the time. Just use once and throw away. As long as you use steel nozzle I think it’s fine no lead dangers.
What is up with the coloring of the image, she looks like MJ
They hired the mushroom guy why hasn’t he just had mushroom added as default or include more features?
For my printer I use a Sonoff S31 flashed with tasmota. I then set it so it can’t be turned off remotely but can be turned on. That way I get the benefit of being able to remote start a print but not being able to accidentally turn it off.
I have a feeling it’s because most are single, living alone, in a basement programming. This is a joke as it’s the only way I can rationalize it because if they had kids they would understand you don’t want your kids turning on your bedroom lights in the middle of the night.
Everything looks good until you plug in the wires then it looks like spaghetti.
You can do some basic thread generation in tinkercad the thread generator has some options.
There is this but it’s replacing almost everything inside. https://hackaday.com/2023/07/23/google-nest-mini-gutted-and-rebuilt-to-run-custom-agents/ I am hoping they sell the boards but most likely won’t out of fear of Google lawyers.
$16