I have a Sovol SV07 Plus, that is the newer version of the SV06 Plus… or in other words, the mechanically identical, but larger, SV06. It’s easy to assemble, it’s bigger than the A1 Mini. Now, you don’t know how big your printer needs to be, until you find out that it’s too small! I found that the 22cm square offered by my old Ender 3 was enough for most things, but it wasn’t enough for everything. I also had a 12cm square with a Monoprice Select Mini Plus V2(the name was the biggest thing lol) and that was quick to become restrictive. Would I suggest the A1 Mini, that has halfway between the two? I don’t know. But at the same time it comes pre assembled (it might not be a concern for you) and easy to use. In short I would recommend the SV07 as that’s the small and less expensive version of what I have, but the SV06 should be mechanically identical so that gives me hope it’ll perform equally well. The downsides are a less than stellar control unit (the hardware inside the touchscreen), a weird as fuck cooling fan that is super loud, and instructions that trick you into believing that the packets of screws are numbered in a meaningful way. Don’t. That said it prints everything with ease, it’s really fast and that fan might be loud, but at the same time works wonders. I love it. Oh! Also. Once I ever so slightly fucked up the Z offset, making it scrape quite thoroughly the build surface: nothing got damaged, build surface included!

It’s a bit of a general issue. The police in itself is good, however… it’s a job that puts people into a position of power. Power corrupts, and if you factor in that they’re not well paid (because tanks and so on are better ways to spend a budget…) but are supposed to put their lives on the line, then get treated either like the enemy or the “thin blue line” I see how things can go bad. Being a public service, they’re managed by the government and sent to deal with trouble accordingly, and the definition of trouble varies with whoever is at the top. Sprinkle in some dangerous levels of nationalism, the US being a super power and you most certainly get to hear about their unrest, while the stuff going on in your own country might be less flashy.

A small trivia bit that you might or might not know: at the beginning there was this organization that was created to protect the people from abuses by local lords. Everyone knows what an unholy shitfest that got corrupted into, given that I’m talking about the mafia…

Shower grade thought: whatever protest or manifestation proud boys might do, with firearms in plain view, nobody is going to even notice. Pride, BLM or similar if there’s guns for actual self defense rather than intimidation? How big of a bloodbath would it to turn into?

The wireless Reolinks are not great. Like, nothing against the camera itself, however, the WiFi antenna must be smaller than the one in my watch. The range is truly abysmal.

Tapo ones are perfectly fine, good quality all around, but it’s important to specify that I have experience with external, solar powered Reolinks and indoor Tapo, so it’s a bit of a different category.

https://lemmy.world/post/14638499

Alternatively: Paris is the fastest lover in the universe.

Dogs pee on sacred trees, they are probably not welcome abroad starships.

Ahh, thank you. I’ll have a laugh once I’ll get around to watching it :D

This is really confusing me. Is it one of the new series? I’m not yet up to date on them, otherwise I’m really, really drawing a blank here XD

All I can think is “Do you even lift, bro?” and chuckle.

Seconding this. I had a rock solid Ender 3 since 2018 that got a few upgrades (btt 32 bit silent board, geared extruder, abl, couple of printed add ons) but never really needed any maintenance, recently upgraded to a Sovol SV07 Plus (big SV07, mechanically similar to the SV06) and hot damn! It’s a beast. Not only it goes stupid fast, can reach higher temperatures, heats faster… but it’s great out of the box and it prints TPU like nothing. Really, I tested it without changing anything and it worked fine. Downsides are that I got used to Octoprint and it can’t be used here, but Klipper is a decent replacement. Now, the ugly bit about that: it’s running on a really cheap board and an oddly customized os. You don’t notice any of that normally so that’s a plus, HOWEVER if like me you have a Spaghetti Detective/Obico account things change. There’s some copy paste to do via ssh, then the webcam struggles to hit 15 fps and whatever you do DON’T push any update button! Those wrecked everything. Not a fun few hours when I tried to figure out how to fix it.

Anyway the SV06 mentioned by OP is with Marlin rather than Klipper so none of the warnings apply :D

Yeah, I think I overdid the bit with “extra detail” and ended up giving her an older look. Still an image I’m happy to have wrangled out of Stable Diffusion :D

AI generated stuff doesn’t have to be bad.

Master, I beg you to reconsider!

Your cat ran away? So you’re cat less? A word of advice, your sword might become legendary, keep it safe.

Are you sure about that?

Had almost the same idea, was too lazy to do it…

I’ve been wondering about that too, after seeing this post I watched a 10+ minutes video and it was fine, but I’m not… on an average setup.

So for the moment I’m just going to suppose it’s not active for me yet. Thanks.

I’m going to top that… I thank whatever assistant I’m talking to. After I get the answer. And they’re not listening anymore.

Real or not, it just feels wrong not to thank after I asked for something and received it.

In iOS there’s an option in the app to select a different icon, including the old design. Now, they’ve updated all the others so if you want the old design and for example the purple icon that’s a no go, but…